+86-400-1866-598 cs@chinasteelmarket.com +86-18864881658 (Whatsapp&Wechat)
Login | Register
Empowering small and medium-scale steel purchasing
Quickly obtain FOB/CIF price

Steel Products output Articles

  • Previous
  • 1
  • Next
Page 1 of 1
Short News
18/11 17:28
< On November 18, the price of carbon steel round bars in Hangzhou did not decline significantly. 45# (ASTM 1045) Hanggang Φ30-85 (hot rolling) 510.00, down 3.00. (USD/ton)
18/11 17:28
< On November 18, the price of cold heading steel in Jiaxing did not fluctuate significantly. 35K (SWRCH35K) Shagang Φ30-38 (hot rolling) 522.00, up 1.50. (USD/ton)
18/11 17:27
< On November 18, the price of stainless steel strip coil in Foshan remained stable. 304/NO.1 Dingxin 3.0*485-730 (hot rolled, slit edge) 2025.00. (USD/ton)
18/11 17:26
< On November 18, the price of stainless steel welded pipe in Tianjin remained stable. 304 Youfa Φ108*4 (pickled) 2610.00. (USD/ton)
18/11 17:22
< On November 18, the price of stainless steel round bars in Wenzhou did not drop significantly. 316L Qingshan Φ30mm 4147.50, down 7.50. (USD/ton)
Read More
18/11 17:16
< On November 18, the price of cold-rolled stainless steel sheet in Wuxi did not drop significantly. 202/2B Ansteel 1.0*1219*2438mm 1965.00, down 22.50. (USD/ton)
Read More

Answers

  • Why are galvanized steel pipes so much more expensive than black pipes?

    Galvanized steel pipe is more expensive than black steel pipe, primarily because it undergoes an additional hot-dip galvanizing process. The extra costs include the zinc material itself, pickling and fluxing, labor, energy, material loss, coating inspection, and specialized packaging designed to protect the zinc coating from scratches.


  • What are the main materials of corrugated steel pipe culverts?

    Corrugated steel culverts are primarily constructed from Q235 or Q355 (S355JR) carbon steel plates, which are shaped into a corrugated profile, with a yield strength of no less than 235 MPa and a tensile strength of no less than 375 MPa.Typically, they are hot-dip galvanized to provide corrosion resistance. Assembly and sealing are achieved using matching galvanized high-strength bolts and rubber gaskets.


  • Can I use 4140 steel instead of 42CrMo4 steel?

    42CrMo4 and 4140 refer to the same steel alloy, where 42CrMo4 is the name in the European standard, and 4140 is the name in the AISI/SAE standard. Both are widely used in many applications and can be used interchangeably.

    42CrMo4: This is the European (EN) name for the same steel alloy as AISI 4140 steel. In Europe, this alloy is usually known by its EN name "42CrMo4" or the British name BS 708M40.

    4140: This is the AISI (American Iron and Steel Institute) designation for chromium-molybdenum steel (AISI 41xx series steel). Specifically, AISI 4140 is a low-alloy steel containing chromium and molybdenum as strengthening agents.


    Key points: Chemical composition: 42CrMo4 and 4140 steel have similar chemical compositions, with slight differences depending on specific specifications and standards (such as EN or AISI).

    Applications: They are typically used in a variety of applications that require high strength and good toughness, such as the automotive, oil and gas, and mechanical engineering industries.

    Equivalent standards: Although they are essentially the same material, they are named differently because they are standardized by different organizations (EN and AISI). Manufacturers and users typically choose a name based on their location and the standards they follow.

    42CrMo4 and 4140 are two names for the same alloy steel, differing only in naming conventions according to regional standards. They have similar chemical compositions and mechanical properties, making them interchangeable in many applications across different industries. Their high strength, toughness, and versatility in heat treatment make them indispensable in the manufacture of components that require durability and reliability under harsh conditions.


    AISI 4140 is generally considered to be a steel grade that is roughly equivalent to 42CrMo4 (1.7225). Both are chromium-molybdenum (Cr-Mo) series quenched and tempered steels, and their heat treatment process parameters are very similar. However, their chemical composition ranges are not exactly the same. 42CrMo4 has a slightly higher chromium (Cr) and molybdenum (Mo) content and stricter restrictions on impurity content, which gives it better hardenability and superior low-temperature impact performance in large cross-section workpieces.

    For general medium-stress parts, the two can be substituted for each other; however, if critical components, large-section parts, or project requirements require compliance with EN (European) standards, formal approval is required. We can provide 4140 steel and its inspection certificate for your review.


Timely Info Independent Platform Multiple guarantees Self-operated storage

China Steel Market

Empowering small and medium-scale steel purchasing


How can I help you?